| Customization: | Available |
|---|---|
| After-sales Service: | Video Intallment |
| Power Supply: | 220-380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The military standard sand and dust test chamber is a large-scale testing equipment used to simulate sandy and dusty weather and test the sealing performance of product casings. It is designed and manufactured in accordance with the Lc1 test method of GB2423.37-2006 "Sand and Dust Test Methods", military standards GJB150.1A-2009 and GJB150.12A-2009, as well as the requirements of the US military standard MIL-STD-810F. It is suitable for horizontal dust and sand blowing tests.
WBE VIBANG Military Standard Sand and Dust Test Chamber: It is a large-scale testing equipment used to simulate wind and sand climate and test the sealing performance of product shells. It is designed and manufactured in accordance with the GB2423.37-2006 "Sand and Dust Test Methods" standard Lc1 test method, military standard GJB150.1A-2009, GJB150.12A-2009, and the requirements of the US military standard MIL-STD-810F, capable of simulating various test conditions in a wind and sand environment.
Festure:
Test Standard:
GB/T 2423.17-2008,IEC 60068-2-11:1981,GJB 150.11A-2009,GB/T 10125, ISO 9227;,ASTM B 117,GB.T 2423.18, IEC 60068-2-52,ASTM B 368,MIL-STD-202,EIA-364-26
Application:
Military equipment, electronic devices, instruments and meters, aerospace products, battery packs, energy storage cabinets, engines
The product complies with three sand and dust test procedures:
Blowing dust - Blowing sand - Dust suppression
1.Blowing dust: It is used to study the adaptability of equipment to blowing dust (with a diameter of ≤ 149 μm).
2.Blowing sand: used to study the adaptability of equipment to the effect of blowing sand (with diameters ranging from 150um to 850um)
3.Settling dust: It is used to study the impact of settling dust (with a diameter of ≤ 105 μm) on equipment (usually electrical equipment) in areas that are covered or enclosed with almost no air flow, where dust can accumulate for a long time. Settling dust can also affect the heat dissipation of equipment with dust accumulated on the top surface. Settling dust tests are also used to verify the quality of air filters at the inlets of air pollution samplers used outdoors.
Packing & Shipping
Specification
Meet non-standard customization
Workshop size (W*D*H): 1200*2000*2000mm (other models available upon customization);
Temperature range: RT+10~80ºC (adjustable);
Relative humidity: ≤25%RH;
Program I - Dust Blowing: 1. Dust concentration: 10.6±7 g/m³ (quantitative dust addition, automatically adjustable); 2. Dust blowing wind speed: 8.9m/s±1.2m/s (automatically adjustable);
Program II - Sand Blowing: 1. Sand concentration: 1.1g/m³±0.3g/m³ (quantitative sand addition, automatically adjustable); 2. Sand blowing wind speed: 18~29m/s (automatically adjustable); 3. Sand blowing angle: 45° on all four sides and the top (45° sample holder provided);
Test duration: (stop, blow) 1s-99H adjustable;
Sample turntable speed: 1r/min (adjustable);
Sand and dust size requirements for testing: meet the requirements of GJB150.12A 4.3.3.6.
){kind=link}